Not only does the MVP-50T arrive standard with a large assortment
of monitored functions, you can add to the impressive selection when you purchase one or more of the kits below. Check
out the Downloads Section to view wiring diagrams for many of the accessory kits.
All Pressure Transducer Kits include 1 ea. Pressure Transducer, and 1 ea. Cbl-4D-6'
Pressure Transducer, 0 to 120 psi.
Pressure Transducer, 0 to 300 psi.
Pressure Transducer, 0 to 3000 psi.
Absolute Pressure Transducer, 0 to 36
In Hg (Manifold or Cabin Pressure). Price: $150.
Differential Pressure Transducer, 0
to 6 In Hg (Vacuum Pressure, Airspeed, Cabin Differential Pressure). Price: $150.
Differential Pressure Transducer, 0 to
5 in H2O. Price: $250
Electronics International hand crafts each precision Fuel Flow Transducer by hand, in their
factory in Bend, Oregon. This is why all similar tranducers have exactly the same K Factor. For instance, all FT-60's
have a K-Factor of 68,000, FT-90's have a K-Factor of 33,000, and FT-180's have a K-Factor of 22,700. This kind of
precise consistency in manufacturing is not found in any other Flow Transducer.
Fuel Flow Transducer (Red Cube). Range: .6 to 70+ GPH. Price: $295
Fuel Flow Transducer (Gold Cube). Range: .3 to 125 GPH. Price: $295
Fuel Flow Transducer (Black Cube). Range: 5 to 250 GPH. Price: $495
Resistive Level Fuel Module. Must be used with the EDC to measure up
to 4 resistive fuel level sensors. Specify 12 or 24 volt system. Price: $59
3/4" Diameter, Capacitive Fuel Level
Probe, 3/4" NPT fitting, and Accessories. MUST SPECIFY PROBE LENGTH WHEN ORDERING (any lenght from 6 inches to 20
feet long). Price: $198
P-300C-Mini-1/8"( or 1/4")
Diameter Capacitive Fuel Level, 1/4" or 1/8" NPT fitting, and Accessories. MUST SPECIFY PROBE LENGTH WHEN
ORDERING (any length from 2 inches to 6 feet long). Price: $148
Volts and Amps
FM-VA-50-MVP or FM-VA-300-MVP:
Volts/Amps Module. Allows any temperature
or pressure channel on the EDC to measure Voltage AND Current on a seperate bus. Comes with an S-50 or S-300 Shunt.
50 Amp, 50 mV (100 Amp capacity) External Shunt. Price: $35
300 Amp, 50 mV (300 Amp capacity) External Shunt. Price: $43
G Meter, 0.1 g resolution, +/- 8 g's max, for recording g's during entire flight.
EGView Charting Software. Used for analyzing
and downloading data from the MVP-50P. Price (No Discounts): $125
USB Memory Stick, 64 MB or larger. Used to
upload and download data to and from the MVP-50P. Price: $35<
LED Intesnity Control Pot. External Pot used to control the display
intensity of the MVP-50P screen. Price: $39
Adding a second EDC to the MVP allows additional temperatures,
pressures, annunciators and other functions to be monitored on the MVP-50P (Requires use of Input Channel 3 on the
MVP-50P (Display Only)
May be used to display parameters in a second
Voltage Interface Unit. Allows any temperature
of fuel level channel on the EDC to measure output voltage of any device. This voltage measurement can then be used to
drive an annunciator (Canopy Latch, Gear Lights, Baggage Door, etc...) that will be displayed on the MVP-50P screen.
CO Guardian Carbon Monoxide Detector
Remote Mount Carbon Monoxide Detector.
(Requires use of Input Channel 3 on the MVP-50P). Also provides Cabin Pressure (Altitude) and Cabin Temperature. Price
(No Discounts): $459