Glass Panel

Engine Analyzers

Temp Instruments

Remote Switches

Fuel Flow/Press

Fuel Level

RPM

Manifold Pressure

Volts and Amps

Oil Pressure/Temp

Clocks

Turbo Prop

Accessories

MVP-50P

Specifications
MVP-50

MVP
Specifications

Weight: 1.9 Lbs.

Environmental: TSO'd to DO-160

Software: TSOd to DO-178B

Power Requirements: 7.5 to 30 Volts, .3 Amps @24V (Typical), .6 Amps @ 12V (Typical).

USB Port: For USB Memory Sticks Only (not intended to provide power to other electronic devices)

Display: Active TFT Matrix, 262,144 colors. Sunlight readable.

Backlight: External Control Line and Internal Electric Eyes
EDC-33P-4/6  

Weight: 1 Lbs.

Environmental: Meets TSO (DO-160)

Software: Designed and documented to TSO (DO-178B)

Power Requirements: 7.5 Volts to 30 Volts, 0.1 amps (Typical).

Inputs:

    Volts: Measured on the power lead of the EDC.

    Amps: +/- 2.5V differential input, +/- 90V common mode operating range

    Fuel Flow: 2.5V trigger, 5.11K Ohm pull-up to +5V, 0 to 8.3KHz.

    RPM: 2 ea. inputs, may be configured for digital or mag input. Selectable jumper for 4 or 6 Cylinder operation. Over voltage protection for RPM: 3V trigger, impendence = 2.06K with 1V pickup.

    Pressure: 6 ea. inputs, 0 to 2.5V differential input. Impendence >20M Ohms, common mode = 0 to 4 Volts.

    Temperature: 17 ea. inputs, 0 to 2.5V differential input. Impendence = 12.1K Ohms, common mode = 0 to 4V.

    Resistive Fuel Level: 4 ea. inputs, 0 to 18V single ended input, impendence = 14.4K Ohms

    Capacitive Fuel Level: 4 ea. inputs, 0 to 6 KHz. 2.1V trigger, impendence = 33.2K Ohms