The FL-1 offers pilots an accurate, stable digital fuel level for single tank configurations. Not only does the FL-1 display the tank level digitally, it also provides a 210' graphical arc for immediate, quick reference of the tank fuel level.
The FL-1 can be ordered to work with a resistive probe (FL-1R-12 or FL-1R-24, depending on 12 or 24 volts), a capacitive probe (FL-1CA) or a 0-5 volt output (such as with some Skysports probes (FL-1V). Please be sure to specify which model you need when you order your FL-1.
The FL-1 is not STC'd for installation in a certified aircraft.
2.5" x 2.5" x 3.65
" Depth, 2.25" Bezel
A 210' Arc of High Intensity Light Emitting Diodes (LEDs) with an Intensity Control Line
available for dimming.
1/4 Tank Warning
If the tank level reaches 1/4 of a tank, the appropriate yellow LED will blink.
If the tank reaches 1/8 of a tank, the appropriate red LED will blink.
If a wire to fuel tank sensor becomes open, the analog display for the tank
with the problem will show an empty and the digital display will show "OPEN."
Max, Min and Resolution
Minimum fuel level for the fuel tank: 4 gallons.
Maximum fuel level for the tank: 999 gallons.
Resolution: Programmable to 1 or 1/2 Gallon (Fuel levels below 2 gallons will be displayed as "0").
External Warning Control Line
Grounds when any Red Warning LED is on or yellow LED blinking. Current should be limited to 1/10 amp.
7.5 to 35 volts, 1/10
lines allow pilots to adjust the intensity of both the Green Indicator Lights and the LCD Backlight during
210 Degree,analog arc with green, yellow and red LED's.
Large, crisp, LCD display with adjustable backlighting for night operations.
can be modified for $98 to output data to Electronics International's MUX-8A. This allows pilots to
review critical system information for flights.
Pricing & Details
Instrument, Wire Harness,
Installation and Operating Instructions.
Stocked Item (Specify FL-1RA-12, FL-1RA-24, FL-1CA or FL-1V when ordering).
Installation & Operating Instructions
Quick Reference Guide