Electronics International Inc.

 

MVP-50 Glass Panel Engine Monitor
and In-Flight Information System

 

New!  MVP-50T for Turboprop & Jets now shipping!  Click here to view the Brochure.  New!


Currently this instrument is not STC'd. It’s to be used by Experimental Aircraft Owners, TC holders or STC Holders.  Obtaining an STC for this product may take us well over a year or two.  Once this instrument is STC’d we will provide a Customer Loyalty buy back program for any EI instruments you purchased since the introduction of the MVP-50.



 

90-Day Money-Back Guarantee!

 

The MVP-50 provides both engine monitoring and a wealth of in-flight information for the pilot.

Engine Monitor: The MVP-50 replaces over 15 engine instruments and 50 functions in a single full color glass panel display. The MVP-50 features pilot-programmable colors, ranges, limits and a voice alarm for each instrument displayed. The instant a function reaches its programmed limit, the display will blink red or yellow, an external warning light will blink and a voice warning will be activated. The pilot does not have to continually scan a panel full of gauges looking for a possible problem. Also, the MVP-50 incorporates the most powerful engine analyzer on the market. The Bar Graph and Digital Engine Analyzer incorporate many new advanced diagnostic features to help insure engine health and proper operation.

In-Flight Information System: The MVP-50 provides many “Flight Data Screens” to reduce cockpit clutter and pilot workload. Some of these screens are: Fuel Management, Timers, Clocks and Date, Weight and Balance, Data Recording, Checklists (Start, Taxi, Run-up with Mag Drop, Take Off, Landing, Emergency and more), Flight Plans (VFR, IFR, Weather Data and more), General Information (Aircraft Performance, Engine Diagnostics, VASI Lights, VFR Minimums, Altitude Table, Light Gun Signals, Transponder Codes, Frequencies and more), and other screens. The pilot easily can generate custom screens and download them through the USB port.

Hardware: All of the probes and transducers are connected to the EDC (Engine Data Converter). This small box (4.5" x 3.5" x 2.2") converts all engine data to serial data, which is then provided to the MVP-50 via two wires. This reduces installation time and the wire bundle to the instrument panel by over 100 wires. The EDC can interface with any probe or transducer. The MVP-50 provides a USB port to upload Check Lists, Flight Plans, Gen Info, Configuration Data, Software Upgrades and New Features.

 

Package Prices

MVP-50-6: 6 Cyl. MVP-50 Package: $5,485 *
MVP-50-4: 4 Cyl. MVP-50 Package: $4,995 *

* Save Money! Call For Current Substantial Introductory Factory Rebates on MVP-50 Packages

Packages Include (hardware):

Other Functions Included:

MVP-50P Color Display Unit
EDC Engine Data Converter
Pre-wired Harness
All EGT & CHT Probes and Cables
Oil Pressure Transducer and Cable
Oil Temperature Probe and Cable
Fuel Pressure Transducer and Cable
Fuel Flow Transducer and Cable
OAT Probe and Cable
Two RPM Pickups and Cables
Manifold Pressure Transducer and Cable
Shunt (for AMPS) and Cable
Volts Pickup
USB Download/Upload Memory Stick
AL-1R (Red External Warning Light)
Help Screen
EGT Differential
CHT Differential
Shock Cooling
Horsepower
Weight and Balance Data
Weight and Balance Graph
GPS Interface and Data
Fuel Efficiency
Fuel Used for the Trip
Fuel Used Since Fill up
Time to Empty
Distance to Empty
Fuel to Way Point
Time to Way Point
Distance to Way Point
Fuel Reserve
Time Reserve
Distance Reserve
Up Timer
Down Timer
Flight Timer
Tach Timer
Engine Hours
Date
Local Time
Zulu Time
Voice Warnings

Data Recording Included: Selectable .33 second to 6 minute intervals.  At 6 second intervals it will store 665 hours of data!

 

MVP-50 Units, Accessories and Transducers

Any Functions not included in this list (such as TIT, Fuel Level, Carb. Temp, Gyro Vacuum, Hydraulic Pressure, etc.) may be added by purchasing an appropriate probe. Also, the MVP-50P is capable of interfacing to many custom probes. Note: Resistive fuel probes require the RFLM-4-XX to interface with the MVP-50P System.

 

Units

MVP-50-P: Display Unit only for piston engine aircraft. -------------------------------------------------------------------- $ 3595.00
EDC-33-P: Engine Data Converter for piston engine aircraft. -------------------------------------------------------------- $ 495.00


Accessories

EGView: EGView Charting Software. Use for analyzing & Charting downloaded data. ---------------------------------- $ 125.00

USB-64: USB Memory Stick, 64 MB or larger (compatible with MVP-50). Used to upload and
download data to the MVP-50. ----------------------------------------------------------------------------------------------------- $ 35.00

CP-1-MVP: LED Intensity Control Pot. External pot used to control the display intensity of the MVP-50. ------------ $ 39.00

 

Temperature
(Prices are valid only when ordered as part of a MVP-50 Package.)

Any one of the following Temperature Probes and XDS-6' Cable: ---------------------------------------------------- $ 59.00
P-100-MVP: CHT Probe, Screw-in, 3/8"-24
P-101-MVP: CHT Probe, Military Bayonet
A-101-MVP: CHT Adaptor for the P-101, 3/8"-24
P-102-18-MVP: CHT Probe, 18mm Gasket
P-102-14-MVP: CHT Probe, 14mm Gasket
P-102-12-MVP: CHT Probe, 12mm Gasket
P-102-3/8-MVP: CHT Probe, 3/8" Gasket, Piggy-Backs on a primary CHT Probe.
P-110-MVP: Standard EGT/TIT Probe, Hose Clamp, .187D
P-110-F-MVP: Fast Response EGT/TIT Probe, Hose Clamp, .125"D
P-111-MVP: Standard TIT Probe, 1/8" NPT, .187"D
P-111-F-MVP: Fast Response TIT Probe, 1/8" NPT, .187"D
P-112-MVP: Standard TIT Probe, 7/16"-20, .187"D
P-114-MVP: Standard TIT Probe, 1/4" NPT, 187"D
P-114-F-MVP: Fast Response, 1/4" NPT, 125"D
P-120-MVP: Oil Temp Probe, 5/8"-18
P-128-MVP: OAT Probe, 1/4"-28
P-104-MVP: Universal Probe, #6 Hole

XDS-6': One 6' TC cable with crimped D-Sub pins. Use to interface any temperature probe to the MVP
system. Specify Length ($1.60 per foot over 6 feet) ---------------------------------------------------------------------------- $ 39.00

 

Pressure
(Includes a Cbl-4D-6' cable when ordered with the MVP-50)


PT-30GA-MVP: Pressure Transducer, 0 to 40 PSI (see Accessories page for details). ------------------------------ $ 165.00
PT-100GA-MVP: Pressure Transducer, 0 to 120 PSI (see Accessories page for details). --------------------------- $ 165.00
PT-300GA-MVP: Pressure Transducer, 0 to 300 PSI (see Accessories page for details). --------------------------- $ 165.00
PT-3000S-MVP: Pressure Transducer, 0 to 3000 PSI (see Accessories page for details). --------------------------- $ 250.00
PT-30ABS-MVP: Absolute Pressure Transducer, 0 to 36 In Hg (Manifold Pressure). ------------------------------- $ 150.00
PT-60ABS-MVP: Absolute Pressure Transducer, 0 to 70 In Hg (Manifold Pressure). ------------------------------- $ 150.00
PT-05Diff-MVP: Differential Pressure Transducer, 0 to 6 In Hg (Vacuum Pressure). ------------------------------- $ 150.00
PT-04H2O-MVP: Differential Pressure Transducer, 0 to 5 In H20. ----------------------------------------------------- $ 250.00

DPIM-1-MVP: Differential Pressure Interface Module for aircraft that measure fuel pressure in reference
to the upper deck. Includes 1 PT-30GA pressure transducer to measure the upper deck pressure. ------------------- $ 395.00

Cbl-4D-6': One 6' 4-wire cable with crimped D-Sub pins. Used to interface any pressure transducer, fuel
flow transducer or fuel level probe to the MVP system ($0.95 per foot over 6 feet) ------------------------------------- $ 19.00

 

Fuel Flow

FT-60: Fuel Flow Transducer (Red Cube), .6 to 70+ GPH. ------------------------------------------------------------------ $ 295.00
FT-90: Fuel Flow Transducer (Gold Cube), 3 to 125+ GPH. ---------------------------------------------------------------- $ 295.00
FT-180: Fuel Flow Transducer (Black Cube), 5 to 250+ GPH. -------------------------------------------------------------- $ 495.00
FFDM-1-MVP: Fuel Flow Differential Module for aircraft with a pressure carburetor. Includes
FT-60 or FT-90 flow transducer to measure the returned fuel. Please specify FT-60 or FT-90 flow transducer. -- $ 395.00
 

Fuel Level

RFLM-4-12 (or -24): Resistive Fuel Level Module. Must be used with the EDC to measure up to 4 resistive
fuel level sensors. Specify 12 or 24-volt system. ------------------------------------------------------------------------------- $ 59.00

P-300C-MVP: Capacitive Fuel Level Probe with Accessories (see the Accessories page at the back of this
document for details). Specify Probe length. ------------------------------------------------------------------------------------ $ 198.00

Amps

S-50 Shunt: 50 amp, 50mV (100 amp capability) External Shunt (see Accessories page for details). ------------- $ 35.00
S-300 Shunt: 300 amp, 50mV (300 amp capability) External Shunt (see Accessories page for details). ---------- $ 43.00


Now Available for FREE Download!

The Pilot's Manual for Leaning and Diagnosing Engine Problems, by E.I. (680k)

 

MVP-50 Information

Click here for current MVP-50 Software Versions & Update Information

Home

 

Questions?  Please ask us.  We are here to help you.
Sales/Technical Support Phone: (541) 318-6060, Toll Free: (877) 318-6060
Sales/Technical Support Fax:  (541) 318-7575
Sales/Technical Support Email: Click Here
(Email response time during business hours is usually less than 2 hours)